FallTech 7017B Contractor+ 3D Standard Non-belted Harness

Description

FallTech Contractor Plus

FallTech 7017B Contractor+ 3D Standard Non-belted Harness

The FallTech 7017B is a contractor+ 3D Standard Non-belted Full Body Harness from the Contractor Plus family, built around 3 D-rings (dorsal and hip) with polyester webbing rated to 3,600 lb min. static strength.

It meets ANSI Z359.11-2021, OSHA 1926.502 and 1910.66, CSA Z259.10-2018 and is available in 4 size options. Every unit ships with the full FallTech documentation package, linked below for your safety submittals.

3,600 lbStatic Strength Minimum130 to 310 lbANSI User Capacity130 to 425 lbOSHA User Capacity3 D-RingsDorsal and Hip D-Ring Placement5,000 lb webPolyester Webbing Strength2 SizesSize Range UniFit to XL/2XOSHA 1926.502Primary Compliance StandardPolyesterWebbing Material

Who Needs This Product

Crews who need a harness with 3 D-rings for positioning-heavy trades like rebar tying and formwork, keeping both hands free at the work face. The Contractor Plus family is FallTech’s answer for this tier of work, and this configuration adds the specific closure and D-ring arrangement listed in the specifications below.

Features

Proprietary dorsal attachment sleeve

Proprietary dorsal attachment sleeve supports effortless addition of personal SRLs.

Plated alloy steel low-profile

Plated alloy steel low-profile spring tension roller torso adjusters provide simple adjustment.

Breathable padded air-mesh shoulder

Breathable padded air-mesh shoulder yoke delivers added user comfort.

Paired lanyard parking keepers

Paired lanyard parking keepers provide balanced function for single and twin-leg personal SRLs.

Plated alloy steel dorsal

Plated alloy steel dorsal and hip D-rings with mating buckle chest and leg closures.

Complies with ANSI Z359.11-2021

Complies with ANSI Z359.11-2021.

⚠

Safety first. A full body harness is only one part of a personal fall arrest system. Verify anchorage strength, connector compatibility, and fall clearance before work begins, and never use a harness that has arrested a fall until a competent person removes it from service. When calculating minimum required fall clearance, the FallTech manual adds 1.5 ft for harness stretch and D-ring shift during arrest.

Compliance Standards

ANSI Z359.11-2021

Meets the ANSI/ASSP standard for full body harnesses, covering design, testing, and marking requirements.

OSHA 1926.502 and 1910.66

Satisfies OSHA construction and general industry requirements for personal fall arrest system body support.

CSA Z259.10-2018

Certified to the CSA standard for full body harnesses, accepted on Canadian jobsites.

Applications

Commercial constructionSteel, concrete, and framing crews working at height where a personal fall arrest system is required.Roofing and exterior tradesResidential and commercial roofers connecting to anchors with SRLs or energy absorbing lanyards.Steel erection and deckingConnectors and decking crews who need secure body support through a full shift.Maintenance and facilitiesPlant and facility technicians performing elevated work on ladders, platforms, and rooftops.General industryWarehouse, utility, and industrial workers covered by OSHA 1910.140 fall protection rules.Rental and fleet programsSafety managers outfitting crews who need dependable sizing across a workforce.

How to Use

Donning a full body harness takes less than a minute once the straps are adjusted to your body.

1. Inspect first. Check webbing, stitching, D-rings, and buckles for damage before every use. Remove the harness from service if you find cuts, burns, or deformed hardware.
2. Don the harness. Hold the dorsal D-ring, shake the harness so the straps fall free, and slip it on like a jacket.
3. Close and adjust. Connect the chest and leg closures, then adjust the torso so the dorsal D-ring sits between the shoulder blades.
4. Check the fit. You should be able to slide a flat hand, but not a fist, under the leg straps. Tuck loose strap ends into the keepers.
5. Connect and verify. Attach your lanyard or SRL to the correct D-ring for the task, and verify anchorage and clearance based on the delivery location of the work.

Inspection and Service Life

OSHA requires personal fall protection to be inspected before each use, and ANSI Z359.11 adds a formal inspection by a competent person at least annually. Log formal inspections so the service history follows the harness.

• Webbing: look for cuts, fraying, abrasion, burns, chemical damage, and UV fading along every strap
• Stitching: check for pulled, broken, or abraded threads, especially at load-bearing junctions
• D-rings and hardware: confirm no cracks, sharp edges, corrosion, or distortion, and that buckles engage positively
• Labels: verify the label pack is present and legible, including the date of first use
• Load indicators: confirm the fall arrest indicator has not deployed

Retire the harness immediately if it has arrested a fall, if any inspection point fails, or if the label is missing or unreadable. Cut the webbing on retired units and destroy retired equipment so it cannot return to service.

Product Video

Watch: Frontline Confined Space Davit Arm System

See the Frontline davit arm system set up for confined-space entry and non-entry rescue retrieval.

Who Needs This Product

This product is a confined space davit system – the rotating retrieval point that lowers and recovers workers and material over an opening. Confined space teams, utilities, and tank crews build their entry and non-entry rescue around it. It requires a rated winch or 3-way SRL, a full body harness, and a written rescue plan to form a complete system.

Features

360-degree boom

Swing the load over the opening and away to the landing zone.

Two integrated pulleys

Run a fall arrest SRL and a retrieval winch line simultaneously.

Permanent base options

Mount to steel, concrete, or a truck bed for mobile rescue.

Made in the USA

Patriot-line build for Buy American specs.

Removable boom

Lift the boom out when the entry point is not in use.

Tank and edge ready

Reaches over tank rims and leading edges.

Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your lanyard or SRL setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k). Run the Numbers and Stay Safe Launch the Calculator ›

Technical Specifications

Type	Non-Belted Full Body Harness
SKU	7017B
Family	Contractor Plus
D-Rings	3 (Dorsal and Hip)
Closures	Mating Buckle Legs and Chest
Webbing	Polyester
Static Strength	3,600 lb min.
ANSI User Capacity	130 to 310 lb max.
OSHA User Capacity	130 to 425 lb max.
CSA User Capacity	Up to 350 lb including clothing and tools, per the FallTech manual
Standards	ANSI Z359.11-2021; OSHA 1926.502 and 1910.66; CSA Z259.10-2018
Available Configurations	7017B (UniFit S, M, L), 7017BX/2X (Dual-size XL/2X)
Warranty	FallTech 2-year manufacturer warranty, honored through Fall Protection Distributors

Frequently Asked Questions

What sizes does the 7017B come in?The 7017B is available in 2 size options: UniFit (S, M, L) and Dual-size XL/2X. Use the FallTech sizing chart in the submittals section: measure around the widest part of the chest and at the natural waistline, then match to FallTech’s current size table, and confirm fit by adjusting the harness to your body before first use.What standards does the 7017B meet?The 7017B complies with ANSI Z359.11-2021, OSHA 1926.502 and 1910.66, CSA Z259.10-2018. The declaration of conformity in the submittals section documents the certification for your safety file.How many D-rings does the 7017B have and what is each one for?The 7017B has 3 D-rings: dorsal and hip. The dorsal D-ring handles fall arrest, and the side D-rings support work positioning when used with a positioning lanyard.What is the weight capacity of the 7017B?The ANSI user capacity is 130 to 310 lb max. and the OSHA user capacity is 130 to 425 lb max., including the worker, clothing, and tools. For CSA jurisdictions, the FallTech manual lists a CSA user capacity of 350 lb. Static strength of the harness is 3,600 lb min..What closures does the 7017B use?It uses mating buckle legs and chest. Quick-connect buckles speed up donning, tongue buckles offer grommeted adjustment positions, and mating buckles provide an economical secure closure.How often does the 7017B need to be inspected?OSHA requires an inspection before each use, and ANSI Z359.11 calls for a formal inspection by a competent person at least annually. Retire the harness immediately if it arrests a fall or fails any inspection point.When should I replace the 7017B?FallTech does not impose a fixed shelf life; service life is determined by inspection. Replace the harness after any fall arrest event, when webbing shows cuts, burns, or heavy abrasion, when hardware is damaged, or when the label is no longer legible.

Submittals and Documentation

FallTech 7017B Spec SheetOne-page technical specifications for this productFallTech 7017B Instruction ManualFull user instructions, inspection criteria, and donning procedureFallTech 7017B Declaration of ConformityManufacturer declaration of conformity to the listed standardsFallTech 7017B Declaration of Conformity (CSA)Manufacturer declaration of conformity to CSA Z259.10FallTech 7017B Harness Sizing ChartManufacturer sizing chart to match torso and weight to the right size

Related FallTech Equipment

• FallTech 7018B Contractor+ 3D Standard Non-belted Full Body Harness, Tongue
• FallTech 7017X Contractor 3D Standard Non-belted Full Body Harness

Pair this product with compatible FallTech connectors, lanyards, and anchors to build a complete fall protection system with matched components.

Order the FallTech 7017B Today

Every FallTech product we stock ships fast and arrives with full documentation for your safety file. Not sure which size or configuration fits your crew? Our fall protection specialists size harnesses every day.

Call 863-703-4522 for expert help Specifying the right body wear for your application, or order online now for delivery based on the delivery location.