Guardian Concrete Anchor Strap

Description

Guardian Fall Protection

Concrete Anchor Strap with D-Ring

The Guardian concrete anchor strap wraps rebar and structure into a soft, rated tie-off point: webbing construction with a D-ring connection, in 3 ft (10705), sheathed 4 ft (10715), and sheathed 6 ft (10717) lengths. The sheathed versions armor the webbing against the abrasion concrete work dishes out.

Each strap serves one worker under OSHA 1926.502 and 1910.140, rigged per the wrap configurations in the manual. Sold in multi-unit packs sized for crews.

130-420 lbs.Worker Capacity5,000 Lbs.Tensile Strength1 lbsProduct WeightPolyester and MaterialOSHA 1910.140ComplianceOSHA 1926.502ComplianceGuardianLifetime Warranty1 DayUsual Ship Time

Who Needs This Product

Formwork and rebar crews burn through anchor straps, which is why these sell in packs: wrapped around rebar cages, columns, and formwork members per the manual, the strap is often the only anchorage geometry that fits the work. Sheathing on the 4 and 6 ft versions takes the abrasion that kills bare webbing on concrete. Inspect hard and retire without sentiment; straps are consumables.

Features

Protective sheath guards against abrasion

Protective sheath guards against abrasion

Compatible with horizontal lifelines

Compatible with horizontal lifelines

Quick and simple to install

Quick and simple to install

Available in various lengths

Available in various lengths

Jobsite-grade construction

Built with the materials and finish quality Guardian applies across its height safety line.

Documented compliance

Full manufacturer documentation is linked on this page for submittal packages.

Options in This Family

SKU	Description
10705-5PK	Guardian Concrete Anchor Strap, 3 ft, white with D-ring (5-Pack)
10715-5PK	Guardian Concrete Anchor Strap, 4 ft, sheathed with web loop and D-ring (5-Pack)
10717-4PK	Guardian Concrete Anchor Strap, 6 ft, sheathed with web loop and D-ring (4-Pack)

Technical Specifications

SKU	10705-5PK / 10715-5PK / 10717-4PK
Worker capacity	130-420 lbs. including all clothing, tools, and equipment
Tensile strength	5,000 Lbs.
Materials	Polyester and galvanized steel
Product weight	1 lbs
Dimensions	0 in L x 0 in W x 0 in H
Standards	OSHA 1910.140, OSHA 1926.502, ANSI Z359.18
Warranty	Guardian lifetime warranty against defects in material and workmanship

⚠

Anchorage strength is the foundation of the system. The structure and anchor must withstand 5,000 lbs per attached worker or maintain a 2:1 safety factor under qualified-person supervision. Verify substrate, fastener, and orientation requirements against the instruction manual before every installation.

Compliance Standards

OSHA 1910.140

This product is compliant with OSHA 1910.140 when used as part of a complete, competent-person verified system.

OSHA 1926.502

This product is compliant with OSHA 1926.502 when used as part of a complete, competent-person verified system.

ANSI Z359.18

This product is compliant with ANSI Z359.18 when used as part of a complete, competent-person verified system.

ISO 17025 lab tested

Guardian products are tested in an ISO 17025 accredited laboratory; available documentation is linked below.

Typical Applications

Commercial constructionAnchorage for personal fall arrest during structural work.Residential constructionTie-off points for framing, roofing, and exterior trades.Plant maintenanceRecurring anchorage at tanks, racks, and platforms.Steel erectionConnection points during beam and decking work.Concrete workAnchorage during forming, placing, and finishing.Bridge and civilTie-off during inspection and rehabilitation.Solar installationAnchor points for install and service crews.Safety program standardizationOne anchor model and inspection routine across the company.

Installation Overview

Installation must follow the Guardian instruction manual for this anchor. The sequence below is an overview only.

1. Inspect first. Check the anchor body, connection point, and hardware before every installation.
2. Verify the structure. The supporting structure must meet the strength requirements in the instruction manual.
3. Install per the manual. Follow the substrate, fastener, and orientation requirements exactly; fill every required fastener position.
4. Verify the connection. Confirm the anchor is fully seated and the connection point is accessible and undamaged.
5. Connect the system. Attach a compatible connecting device and verify the complete personal fall arrest system with a competent person.
6. Check clearance. Confirm fall clearance below the work area and minimize swing fall hazards before work begins.

Inspection and Retirement

Inspect before every use, and have a competent person perform a documented inspection at least every six months under ANSI Z359.2 practice. Remove the anchor from service for any of the conditions below.

• Cracks, corrosion, or deformation of the body, connection point, or welds.
• Loose, missing, damaged, or worn hardware and fasteners.
• Elongation or wear at the D-ring or connection eye.
• Missing or illegible labels.
• Any evidence the anchor has arrested a fall.

Retirement triggers: any fall event on the anchor, or any condition where the inspector cannot positively verify it is fit for service.

Fall Protection
Distributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your SRL or lanyard setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k). Run the Numbers and Stay Safe Launch the Calculator ›

Frequently Asked Questions

Which length should I choose?Match the member you wrap: 3 ft (10705) for rebar and small members, 4 ft (10715) and 6 ft (10717) sheathed versions for columns and formwork where abrasion resistance matters. All three connect through a D-ring per the manual wrap configurations.What does the sheath do?The sheath armors the webbing against concrete and rebar abrasion, the wear mode that retires most anchor straps. The 3 ft white strap trades the sheath for visibility and economy on lighter duty.How often should anchor straps be replaced?Inspect before every use for cuts, fraying, chemical damage, and sheath wear-through, and retire on any failure or fall event. High-abrasion concrete work retires straps on cycles measured in months, which the pack format anticipates.What options does the Guardian Concrete Anchor Strap come in?Stocked options: 3 ft, white with D-ring (10705-5PK); 4 ft, sheathed with web loop and D-ring (10715-5PK); 6 ft, sheathed with web loop and D-ring (10717-4PK). Every option carries the same Guardian lifetime warranty and ships in 1 business day.Which standards does this product meet?It is compliant with OSHA 1910.140, OSHA 1926.502, ANSI Z359.18 when used within a complete, competent-person verified fall protection system, and Guardian products are tested in an ISO 17025 accredited laboratory.What is the rated capacity?The rated worker capacity is 130-420 lbs., including all clothing, tools, and equipment carried by the worker.When should this product be retired?Retire it after any fall event, any failed inspection item, or whenever an inspector cannot positively verify it is fit for service. The inspection criteria in the linked documentation define the pass-fail conditions.

Guardian Concrete Anchor Strap Submittals and Documentation

Guardian Concrete Anchor Strap Manual (PDF)Installation, use rules, and inspection criteria from the manufacturer.Guardian Concrete Anchor Strap Tds (PDF)Dimensions, materials, capacities, and the full compliance summary.Guardian Concrete Anchor Strap Test Report (PDF)ISO 17025 accredited laboratory test results.Guardian Concrete Anchor Strap Doc Of Conformity (PDF)Manufacturer declaration of conformity.Guardian 00205 Inspection Form (PDF)Printable competent-person inspection checklist.

Compatible and Related Products

• Guardian 00455 Temper Roof Anchor 4-Pack. Reusable residential roof anchors.
• Guardian Poly Steel Rope Vertical Lifeline Assembly. Complete lifeline to pair with this anchor.
• Guardian External Shock Absorbing Lanyard 2-Pack. Connecting devices for anchored workers.

Specifying Anchors for Your Jobsite?

Substrate, structure, and system layout decide the right anchor. Confirm your application with us and we will make sure the right equipment ships together, based on the delivery location.

Call 863-703-4522 to talk to a fall protection specialist.