Super Anchor 5000-ZY Aluminum Captive Eye Carabiner 2-Pack

Description

Super Anchor Lanyards and Connectors

Super Anchor 5000-ZY Aluminum Captive Eye Carabiner 2-Pack

The Super Anchor 5000-ZY is an aluminum twist lock carabiner with a captive eye that keeps the connector oriented on its attachment point. This listing is a 2-pack: two carabiners per order.

Sold as a 2-pack (two per order).

3,600 lbGate StrengthTwist LockSelf-LockingAluminumTwist Lock2-PackJob LotCaptive EyeOptionANSI Z359CompliantReusableConnectorRatedFall Protection

Who Needs This Product

The 5000-ZY is an aluminum captive eye locking connector for fall protection, sold as a 2-pack for crews that reorder connectors regularly. Confirm compatibility with your harness, lanyard, and anchor.

Features

3,600 lb gate strength

Self-closing, self-locking gates rated to 3,600 lb.

Captive eye design

Captive eye pin keeps the carabiner oriented on the attachment point.

Twist lock

Twist-lock gates resist rollout.

Bulk packs

Two carabiners per order in one job-lot pack.

Reusable

Durable reusable connectors.

ANSI Z359

Meets the American National Standard for connectors.

⚠

This is one component of a personal fall-arrest system. Verify connector compatibility to avoid rollout, and never connect two snaphooks or carabiners to each other. Inspect before each use and confirm compatibility, capacity, and fall clearance. Run the Fall Protection Calculator below before you tie off.

Compliance Standards

ANSI Z359

American National Standards for connecting components and energy absorbers.

OSHA 29 CFR 1926.502

Federal construction fall protection requirements.

Typical Applications

ConstructionEveryday fall protection connections.IndustrialPlant and facility work.RiggingConnector for rated components.MaintenanceReorder connectors in bulk.

How to Use the Carabiner

Follow the Super Anchor Safety instruction manual. The sequence below is an overview only.

1. Inspect. Check for wear, cuts, distortion, corrosion, and gate or hardware function before each use.
2. Confirm compatibility. Verify the component, harness, and anchor are compatible and rated.
3. Connect. Make the connection and confirm every gate is fully closed and locked.
4. Verify. Confirm the full system, capacity, and fall clearance.
5. Use. Work within the rated limits of the system.

Inspection and Retirement

Inspect before each use, with a documented competent-person inspection at least annually. Remove the product from service for any condition below.

• Webbing or body: cuts, frays, abrasion, burns, corrosion, or distortion.
• Stitching: pulled, cut, or broken threads.
• Gates and locks: proper close and lock function.
• Fall indicators: any sign of deployment.
• Labels: illegible or missing markings.

Retire the anchor immediately after any fall-arrest event, or if any inspection point fails.

Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k). Run the Numbers and Stay Safe Launch the Calculator ›

Technical Specifications

SKU	5000-ZY-2PK (two 5000-ZY carabiners)
Type	Aluminum captive eye twist lock carabiner
Gate strength	3,600 lb
Materials	Aluminum, captive eye pin
Standards	ANSI Z359; OSHA 1926.502
Warranty	Super Anchor Safety manufacturer warranty; see Warranty tab

Frequently Asked Questions

How many come in the 5000-ZY-2PK pack?Two captive eye carabiners per order: each is an aluminum twist lock carabiner with a captive eye that keeps it oriented on the attachment point. Store it in a clean, dry place away from heat and chemicals to help preserve its condition between uses. Before every use, confirm the product is compatible with the rest of your fall protection system and that you have adequate fall clearance below the work area.What does the captive eye do?The captive eye pin keeps the carabiner positioned on its attachment point so it cannot shift or cross-load in use. Confirm each component in the system is compatible and rated for the intended use before connecting to it. Only trained workers should select, install, and use fall protection equipment for its intended application.Where is a captive eye carabiner used?Crews use captive eye carabiners where the connector must stay fixed in position on a device or bracket, such as dedicated equipment connections. The captive pin keeps the 5000-ZY from rotating away from its intended loading direction. Always inspect the product before each use and take it out of service if you notice any damage, deformation, or excessive wear.Why is the 5000-ZY sold as a 2-pack?This listing is the 2-pack only, sized as a job lot for crews that go through connectors; each of the two units is identical. Keep the manufacturer instructions with the equipment so anyone using it can reference the approved procedures. Confirm each component in the system is compatible and rated for the intended use before connecting to it.What compliance applies to the 5000-ZY?The 5000-ZY supports OSHA 1926.502 compliant systems; confirm the completed connection meets ANSI Z359 requirements. A qualified person should verify that the installation and the overall system meet the requirements of your specific job site. Pair it only with connectors and equipment that are approved for use together so the complete system performs as designed.Is carabiner-to-carabiner connection allowed?No. Never connect two carabiners or snaphooks to each other; the gates can interfere and roll out under load. Store it in a clean, dry place away from heat and chemicals to help preserve its condition between uses. Always inspect the product before each use and take it out of service if you notice any damage, deformation, or excessive wear.What completes a fall protection system with the 5000-ZY?No. It is one component of a personal fall arrest system and must be combined with a full body harness, a connecting device, and a rated anchor. Before every use, confirm the product is compatible with the rest of your fall protection system and that you have adequate fall clearance below the work area. A qualified person should verify that the installation and the overall system meet the requirements of your specific job site.

Carabiner Submittals and Documentation

Connector Manual (PDF)Use, compatibility, and inspection for connectors. Super Anchor Warranty and Compliance Statement (PDF)Manufacturer warranty and standards compliance.

Related Super Anchor Products

• 5001-Z Steel Twist Lock Carabiner 4-Pack
• 5006-Z Aluminum Twist Lock Carabiner 3-Pack
• Super Anchor harnesses

Reordering Connectors?

Connector type and quantity affect the order. Confirm your needs with us and we will help match the right carabiner packs.

Call 863-703-4522 to talk to a fall protection specialist.