Super Anchor CRA 3-Way Guardrail Stanchion

Description

Super Anchor Lanyards and Connectors

Super Anchor CRA 3-Way Guardrail Stanchion

The Super Anchor 1092-3 is a 3-way CRA guardrail stanchion for commercial roof edge protection. It provides attachment points for guardrail rails as part of a passive fall protection system on commercial roofs.

The stanchion mounts to the CRA commercial anchor system and is built for durable, repeatable guardrail installation.

3-WayGuardrail StanchionCommercialRoof EdgeCRA SystemCompatiblePassiveFall ProtectionDurableSteelOSHA 1926.502GuardrailRepeatableInstallEdge ProtectionRooftop

Who Needs This Product

The 1092-3 CRA stanchion is a passive fall protection component for commercial roofers and building owners installing guardrail edge protection. It works within the CRA commercial anchor system. Confirm the guardrail system design with a qualified person.

Features

3-way stanchion

Provides three attachment directions for guardrail rails.

CRA compatible

Mounts to the CRA commercial anchor system.

Passive protection

Part of a guardrail edge protection system.

Durable steel

Built for repeated commercial installation.

Roof edge

Protects the perimeter of commercial roofs.

OSHA guardrail

Supports OSHA 1926.502 guardrail systems.

⚠

This is one component of a personal fall-arrest system. Guardrail systems must be designed and installed per a qualified person and OSHA 1926.502. Inspect before each use and confirm compatibility, capacity, and fall clearance. Run the Fall Protection Calculator below before you tie off.

Compliance Standards

ANSI Z359

American National Standards for connecting components and energy absorbers.

OSHA 29 CFR 1926.502

Federal construction fall protection requirements.

Typical Applications

Commercial roofingGuardrail edge protection.Rooftop workPerimeter protection.MaintenancePassive fall protection.FacilitiesPermanent guardrail.

How to Use the CRA Guardrail Stanchion

Follow the Super Anchor Safety instruction manual. The sequence below is an overview only.

1. Inspect. Check for wear, cuts, distortion, corrosion, and gate or hardware function before each use.
2. Confirm compatibility. Verify the component, harness, and anchor are compatible and rated.
3. Connect. Make the connection and confirm every gate is fully closed and locked.
4. Verify. Confirm the full system, capacity, and fall clearance.
5. Use. Work within the rated limits of the system.

Inspection and Retirement

Inspect before each use, with a documented competent-person inspection at least annually. Remove the product from service for any condition below.

• Webbing or body: cuts, frays, abrasion, burns, corrosion, or distortion.
• Stitching: pulled, cut, or broken threads.
• Gates and locks: proper close and lock function.
• Fall indicators: any sign of deployment.
• Labels: illegible or missing markings.

Retire the anchor immediately after any fall-arrest event, or if any inspection point fails.

Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k). Run the Numbers and Stay Safe Launch the Calculator ›

Technical Specifications

SKU	1092-3
Type	3-way CRA guardrail stanchion
System	CRA commercial anchor
Function	Guardrail rail attachment
Standards	OSHA 1926.502 guardrail
Warranty	Super Anchor Safety manufacturer warranty; see Warranty tab

Frequently Asked Questions

What is the 1092-3?A 3-way guardrail stanchion for commercial roof edge protection within the CRA system. Confirm each component in the system is compatible and rated for the intended use before connecting to it. Always inspect the product before each use and take it out of service if you notice any damage, deformation, or excessive wear.Is this fall arrest or guardrail?It is a passive guardrail (edge protection) component, not a personal fall-arrest anchor. Pair it only with connectors and equipment that are approved for use together so the complete system performs as designed. For complete protection, pair it with a compatible full body harness, connector, and shock absorbing lanyard or self retracting lifeline.What does it attach to?The CRA commercial anchor system, with guardrail rails. Follow the recommended fastener pattern and placement so the connection is secure, and re-check the installation before you rely on it for fall arrest. Only trained workers should select, install, and use fall protection equipment for its intended application.How many directions does it support?Three, for corner and run guardrail layouts. Pair it only with connectors and equipment that are approved for use together so the complete system performs as designed. Store it in a clean, dry place away from heat and chemicals to help preserve its condition between uses.What standard does it meet?OSHA 1926.502 guardrail requirements. Using the product within the limits described on this page helps keep your setup consistent with recognized fall protection practice. Store it in a clean, dry place away from heat and chemicals to help preserve its condition between uses. Keep the manufacturer instructions with the equipment so anyone using it can reference the approved procedures.Who should design the guardrail?A qualified person per OSHA 1926.502. Following the manufacturer guidance on this page is part of keeping your equipment audit ready. A qualified person should verify that the installation and the overall system meet the requirements of your specific job site. Store it in a clean, dry place away from heat and chemicals to help preserve its condition between uses.Is it durable?Yes, it is built steel for repeated commercial installation. Verify that the mounting surface is sound and that every fastener is fully seated before the anchor is put into service. If you have any doubt about the correct setup, consult a qualified person or the manufacturer instructions before putting the system into service.

Super Anchor CRA Guardrail Stanchion Submittals and Documentation

Super Anchor CRA Manual 2023 (PDF)Commercial roof anchor installation and inspection. Super Anchor CRA Horizontal Lifeline Rigging Manual (PDF)HLL rigging for commercial anchors. Super Anchor Warranty and Compliance Statement (PDF)Manufacturer warranty and standards compliance.

Related Super Anchor Products

• Super Anchor lanyards and connectors
• Super Anchor harnesses

Specifying Guardrail Systems?

Roof layout and edge conditions affect the guardrail design. Confirm your project with us and we will help match the right CRA stanchions.

Call 863-703-4522 to talk to a fall protection specialist.