Super Anchor Integral Adjuster Mechanical Rope Grab 3-Pack

Description

Super Anchor Lanyards and Connectors

Super Anchor Integral Adjuster Mechanical Rope Grab

The Super Anchor 4015-M is a mechanical rope grab with an integral adjuster for 5/8 inch three-strand vertical lifelines. It trails the worker on the lifeline and locks onto the rope in a fall for hands-free vertical fall arrest.

The 4015-M is zinc coated and certified to ANSI Z359.

5/8 in3-Strand RopeMechanicalRope GrabIntegralAdjusterHands-FreeTrailingZinc CoatedSteelANSI Z359CompliantFall ArrestVerticalReusableDevice

Who Needs This Product

The 4015-M is a mechanical rope grab for workers using a 5/8 inch vertical lifeline for fall arrest. Complete the system with a full-body harness, an energy-absorbing connector where required, a compatible vertical lifeline, and a rated anchor.

Features

Mechanical rope grab

Locks onto the lifeline in a fall for vertical fall arrest.

Integral adjuster

Built-in adjuster trails the worker hands-free.

Fits 5/8 inch rope

For 5/8 inch three-strand vertical lifelines.

Zinc coated

Durable zinc coated steel.

Reusable

A reusable fall-arrest device.

ANSI Z359

Meets the American National Standard for rope grabs.

⚠

This is one component of a personal fall-arrest system. Use only on a compatible 5/8 inch vertical lifeline, and position the rope grab per the instruction manual. Inspect before each use and confirm compatibility, capacity, and fall clearance. Run the Fall Protection Calculator below before you tie off.

Compliance Standards

ANSI Z359

American National Standards for connecting components and energy absorbers.

OSHA 29 CFR 1926.502

Federal construction fall protection requirements.

Typical Applications

RoofingVertical fall arrest on a lifeline.ConstructionLadder and vertical access.MaintenanceWork on vertical lifelines.UtilityVertical positioning.

How to Use the Mechanical Rope Grab

Follow the Super Anchor Safety instruction manual. The sequence below is an overview only.

1. Inspect. Check for wear, cuts, distortion, corrosion, and gate or hardware function before each use.
2. Confirm compatibility. Verify the component, harness, and anchor are compatible and rated.
3. Connect. Make the connection and confirm every gate is fully closed and locked.
4. Verify. Confirm the full system, capacity, and fall clearance.
5. Use. Work within the rated limits of the system.

Inspection and Retirement

Inspect before each use, with a documented competent-person inspection at least annually. Remove the product from service for any condition below.

• Webbing or body: cuts, frays, abrasion, burns, corrosion, or distortion.
• Stitching: pulled, cut, or broken threads.
• Gates and locks: proper close and lock function.
• Fall indicators: any sign of deployment.
• Labels: illegible or missing markings.

Retire the anchor immediately after any fall-arrest event, or if any inspection point fails.

Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k). Run the Numbers and Stay Safe Launch the Calculator ›

Technical Specifications

SKU	4015-M
Type	Mechanical rope grab with integral adjuster
Rope	5/8 in three-strand
Finish	Zinc coated
Standards	ANSI Z359; OSHA 1926.502
Warranty	Super Anchor Safety manufacturer warranty; see Warranty tab

Frequently Asked Questions

What rope does the 4015-M fit?5/8 inch three-strand vertical lifelines. Make sure the connecting hardware and anchorage suit your application before you attach a lanyard or lifeline. Store it in a clean, dry place away from heat and chemicals to help preserve its condition between uses. Keep the manufacturer instructions with the equipment so anyone using it can reference the approved procedures.Is it hands-free?Yes, the integral adjuster trails the worker hands-free and locks in a fall. Make sure the connecting hardware and anchorage suit your application before you attach a lanyard or lifeline. If you have any doubt about the correct setup, consult a qualified person or the manufacturer instructions before putting the system into service.What is it made of?Zinc coated steel. See the Technical Specifications on this page for the exact materials, dimensions, and ratings. Before every use, confirm the product is compatible with the rest of your fall protection system and that you have adequate fall clearance below the work area. For complete protection, pair it with a compatible full body harness, connector, and shock absorbing lanyard or self retracting lifeline.Do I need a lifeline with it?Yes, a compatible 5/8 inch vertical lifeline, plus a harness and rated anchor. Make sure the connecting hardware and anchorage suit your application before you attach a lanyard or lifeline. Keep the manufacturer instructions with the equipment so anyone using it can reference the approved procedures.Is it reusable?Yes, it is a reusable fall-arrest device. Confirm each component in the system is compatible and rated for the intended use before connecting to it. Keep the manufacturer instructions with the equipment so anyone using it can reference the approved procedures. Only trained workers should select, install, and use fall protection equipment for its intended application.What standard does it meet?ANSI Z359 for rope grabs. Following the manufacturer guidance on this page is part of keeping your equipment audit ready. A qualified person should verify that the installation and the overall system meet the requirements of your specific job site. Store it in a clean, dry place away from heat and chemicals to help preserve its condition between uses.Do I need an energy absorber?Use an energy-absorbing connector where the application requires one. Confirm each component in the system is compatible and rated for the intended use before connecting to it. Only trained workers should select, install, and use fall protection equipment for its intended application. Always inspect the product before each use and take it out of service if you notice any damage, deformation, or excessive wear.

Super Anchor Mechanical Rope Grab Submittals and Documentation

Lifeline and Rope Grab Manual 2024 (PDF)Use, installation, capacity, and inspection. Lifeline Buying Guide (PDF)Selection and configuration guide. Warranty and Compliance Statement (PDF)Manufacturer warranty and standards compliance.

Related Super Anchor Products

• Super Anchor lanyards and connectors
• Super Anchor harnesses

Need Rope Grabs?

Rope size and lifeline compatibility affect the choice. Confirm your lifeline with us and we will help match the right rope grab.

Call 863-703-4522 to talk to a fall protection specialist.